LIGHTING – ELECTRICAL – TELECOMMUNICATION SYSTEM
When designing an office, it is very important to renovate the lighting system, electrical system, and telecommunications. They are an indispensable component in all kinds of constructions. Ensure safety in the office. Improve the whole system Electricity used for lighting usually accounts for quite a lot of total electricity consumption. The cause comes from the…
Details content
When designing an office, it is very important to renovate the lighting system, electrical system, and telecommunications. They are an indispensable component in all kinds of constructions. Ensure safety in the office.
Improve the whole system
Electricity used for lighting usually accounts for quite a lot of total electricity consumption. The cause comes from the design and installation of lighting and air conditioning equipment that consumes energy. In addition, the use of electricity for lighting is very wasteful. Currently, units often use LED lighting systems. This is a “friendly”, “attractive” lighting option that celebrates the design of the office. This solution also helps to increase the energy efficiency index.
Besides the lighting system, the air conditioning system in the room also plays a very important role.
Depending on the project, the appropriate air conditioning system will be used. Can ensure technical requirements, save operating costs. Some commonly used air conditioning systems today are:
- Local air conditioning.
- Water-cooled central air-conditioner.
- VRV type central air conditioning system using the inverter.
The role of renovating the system of power lines and network wires
Wiring and network wiring play an increasingly important role. Devices, as well as the internet, are strongly influencing life and work. They all need electricity. An electrical system – network wires are designed and constructed reasonably and methodically. The principle will make the use and operation convenient and make the long-term operation safe and sustainable. When renovating the office, it is necessary to pay attention to the electrical safety system and network wires. Accordingly, owners need to actively consult professionals or service companies on electrical installation, repair, and home improvement.
Notes during electrical system installation
- When renovating the power line system, the electrical conductors need to be covered with insulating plastic pipes. To avoid direct contact, it may cause an accident when open, electric leakage. The wall wiring system must also be secured with chicken intestine pipes.
- Electrical connections need to be installed in electrical cabinets, sockets, lightboxes, switches, and not in-wall pipes. The joints must also be carefully tied with the correct technique and wrapped with specialized glue.
- Pay attention to the installation of electrical equipment such as Sockets, junctions, lights in reasonable and safe areas.
- Install automat for the electrical system in the office. Immediately disconnect the power when there is an emergency to avoid damage, fire, and explosion.
Network wiring also needs special care when installing to avoid causing electrical problems caused by network wires.
Calculation of power line capacity
The selection of electrical conductors with appropriate capacity for the office. Not only ensures the best transmission of power but also saves costs.
Calculating the total capacity of electricity-consuming devices: Power-consuming devices are devices that consume electrical energy such as lights, fans, rice cookers, refrigerators, washing machines, microwave ovens, and air conditioners. temperature, water pump…
On these power-consuming devices, there will be a power value, with the unit being W (What), kW (Kilo-What), or HP (Horse Power- Horsepower). Comparatively, it is possible to consider all power values recorded on devices as power consumption. Therefore, the total power consumption of appliances is the sum of all the power values of the appliances consuming electricity in the house.
When encountering different power units, convert to the same unit as follows:
- 1kW = 1,000W
- 1HP = 750W
The power line capacity calculation will help determine the current value line that the line allows. At the same time, to choose the right type of electrical conductor, to avoid the situation of using electrical conductors that do not meet the requirements, causing problems or not ensuring electrical safety in the office.
DVH Group – Real estate service support unit
When customers need to renovate the lighting system, electrical and telecommunications systems in the office, they need to research and learn about the unit that will receive the service. Choosing a reputable implementation unit not only ensures the quality of the structural system of the office but also ensures the safety of people during use. DVH Group is an experienced unit in implementing professional design and construction projects. From the experience accumulated over many years of the team of quality experts, committed to providing customers with the best quality service.
Contact
DVH GROUP
Address: 196/1/19-21 Cong Hoa, Ward 12, Tan Binh District, HCMC
Office: 22 Nguyen Trung Ngan, Ben Nghe Ward, District 1, HCMC
Email: info@dvhgroupvn.com
Hotline: +84 28 668 06166
Or leave information for a quick and free consultation!
VIE